This will be continually added to.
2009-01-24:
1. Playfield overlay installed, plastics cleaned, new targets installed, new bumper caps installed, new rubber kit, new flipper bats, new post caps, rails repainted, all screws, chrome polished. Replaced one really bad playfield to PS connector (J3). All new bulbs installed on playfield. This estimated to be 20-25 hours.
2. Switches cleaned and adjusted
3. Replaced 2 bad displays
4. MPU partial boot up. No displays. Wrong tune, no K-I-S-S illumination. Light sequencing incorrect. Obviously the wrong ROMS are installed. -Swapped MPU, installed correct ROMS. It lives.
5. Reboots intermittently, appears to be a power loss issue.
2009-01-31:
1. Solenoid driver board: Installed new filter cap. Joined grounds, TP1 to TP3, reflowed connector pins, set HV to 170V. Replaced HV fuse and holders.
2. MPU board: joined ground pins on J4 to ground plane.
3. Lamp driver board: reflowed pins on header connections
4. Power supply: Replaced 2 bridges. Replaced connector J3 (1 to 8), Replaced Diodes CR1 to CR4
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment